Leaking radiator replaced
Pin-hole leak on a corroded radiator in Blackburn. Isolated it, replaced the radiator and valves the same week and checked the rest of the system water for sludge.
Radiator Installation · BB1, BB2
Radiator Installation in Blackburn.
Replacements · Upgrades · Designer radiators · Free quotes
Need radiator installation in Blackburn? Our Gas Safe registered engineers cover BB1, BB2 from our Burnley base. New and replacement radiators fitted by local heating engineers — like-for-like swaps, bigger double-panel upgrades for cold rooms, designer and vertical radiators, heated towel rails and radiators moved to a new position. We drain down, fit, refill with inhibitor, bleed and balance the whole system so every room heats evenly.
4.8 · 176 Google reviews
Gas Safe registered
Same or next-day slots
12-month workmanship warranty
Free Blackburn quote
For radiator installation in BB1, BB2.
Local to Blackburn
Radiator Installation in Blackburn, done properly.
Blackburn is one of our busiest patches — a 30-minute run down the M65 — and we run multiple jobs here every week. The town splits into BB1 (the eastern, more terraced half) and BB2 (the western, leafier half toward Pleasington and Mellor), with very different boiler patterns in each.
Radiators typically last 15–20 years before internal corrosion, sludge and pin-hole leaks set in. Replacing old single-panel radiators with correctly sized modern double-panel radiators — and adding TRVs — can make cold rooms comfortable and lets your boiler run at lower, more efficient temperatures.
Every radiator installation job in Blackburn is carried out by a Gas Safe registered engineer (No. 305612), priced upfront and backed by our 12-month workmanship warranty. Call 01282 914 044 or message us on WhatsApp.
What's included
- Like-for-like radiator replacements
- Bigger output (BTU) upgrades for cold rooms
- Designer, vertical & column radiators
- Heated towel rails for bathrooms
- Radiators moved or added on new pipework
- New TRVs (thermostatic valves) fitted
- System drained, refilled with inhibitor & balanced
- Room-by-room heat calculation on request
When Blackburn customers call us
- A room never gets warm enough
- Radiators cold at the bottom even after a powerflush
- Rust spots, weeping valves or pin-hole leaks
- Old valves that will not turn
- You are redecorating or refitting a bathroom
- You want a radiator moved to free up wall space
How it works
Your radiator installation in 4 simple steps
- 1
Measure & size
We check the room and work out the heat output (BTU) you need.
- 2
Drain down
Floors protected, system drained and old radiators removed.
- 3
Fit & pipe
New radiators and valves fitted, pipework neatly run and clipped.
- 4
Refill & balance
Refilled with inhibitor, bled and balanced so every room heats evenly.
Recent work
Typical radiator installation jobs around Blackburn
Extension radiators added
New kitchen extension in Blackburn needed two extra radiators. Extended the heating circuit, fitted both radiators and checked the boiler could cope with the extra load.
Cold back bedroom fixed
Back bedroom in a Blackburn semi never got warm. The old single-panel radiator was half the output the room needed — fitted a correctly sized double-panel with a TRV and the room now heats with the rest of the house.
Smell gas or CO alarm going off?
Turn off appliances and the gas at the meter, open windows, don't use switches or flames, and call the National Gas Emergency line on 0800 111 999. Once it is made safe, we can repair the fault.
What Blackburn customers say
"Boiler installation was smooth from start to finish. Clean, efficient, and very professional. Highly recommended!"
M. Khan
Blackburn
"Fantastic service! Arrived the same day, diagnosed the problem quickly, and had everything sorted in no time. Couldn't ask for better."
J. Robinson
Burnley
"Boiler installation was smooth from start to finish. Clean, efficient, and very professional. Highly recommended!"
M. Khan
Blackburn
Related services in Blackburn
Radiator Installation · Blackburn
Radiator Installation in Blackburn: FAQs
+How much does radiator installation cost in Blackburn?
It depends on the number of radiators, size and style, and any pipework changes. Extra radiators on the same visit work out cheaper each. Send us the details for a free, fixed-price quote in Blackburn (BB1, BB2).
+Can you fit several radiators in one day in Blackburn?
Yes — most homes can have 3–4 radiators replaced in a single day, including draining down, refilling with inhibitor and balancing.
+Will a new radiator make my room warmer?
If your current radiator is undersized or full of sludge, yes. We calculate the heat the room needs and fit the right size — often a double-panel radiator in the same space.
+Do you fit designer radiators and towel rails in Blackburn?
Yes — vertical, column, designer radiators and heated towel rails across Blackburn and Wilpshire, Pleasington, Mellor.
+Should I get a powerflush with new radiators?
If your system water is black or sludgy, a powerflush first protects the new radiators and your boiler. We check the water on every job and only recommend it if it is needed.
Accredited · Registered · Approved
Gas Safe Registered
No. 305612
Worcester Bosch
Accredited Installer
Baxi Approved
Heating Partner
Vaillant Advance
Trusted Installer
4.8 ★ Rated
176 Google Reviews
G3 Qualified
Unvented cylinder installer
Help available 24/7
Radiator Installation quote for Blackburn.
Free, fixed-price · same or next-day · Gas Safe registered.